FLAT FAN SPRAY NOZZLES

Operating Mechanism and Industrial Applications of Flat Fan Spray Nozzles

Flat fan spray nozzles are industrial fluid-dispensing components that produce a flat spray pattern with well-defined edges and a uniform thickness. By directing fluid onto a surface in a linear strip rather than a circular or conical area, they offer high efficiency in applications involving moving production lines, conveyor systems, and the processing of large surfaces. Their ability to ensure consistent fluid distribution helps keep chemical and water consumption under control, while also preventing areas from being missed or excessively wetted.

Operating Principle and Spray Characteristics

In a standard fan-type geometry, the liquid emerges as a thin, expanding sheet, shaped by the internal flow-directing structure of the orifice and the design of the exit aperture. This configuration creates a distinct line of impact on the surface and offers the following key advantages:
• Uniform Distribution: The liquid density is evenly distributed along the spray line, ensuring consistency in washing, rinsing, and cooling processes.
• Controlled Impact: For applications involving the removal of debris or surface cleaning, the impact force is concentrated along a specific line, thereby enhancing cleaning efficiency.
• Versatility in Angle and Flow Rate: With a range of available spray angles and flow rates, the nozzle can be adapted to suit line speeds, mounting heights, and operating pressures.
• Designed in accordance with fundamental spray nozzle geometries and fluid dynamics principles, the fan-type orifice structure transforms pressurized liquid into a controlled, thin film. 

Industrial Applications

Flat fan spray nozzles are essential components in many industrial lines, integrated alongside various other nozzle types to meet specific process requirements:
• Washing and Surface Preparation Lines: These nozzles provide continuous, effective coverage throughout processes such as metal part washing, degreasing prior to coating, rinsing, and surface cleaning.
• Cooling and Humidification: They facilitate balanced heat transfer in cooling lines for belts, sheets, or other materials.
• Coating, Lubrication, and Chemical Application: They offer controlled coverage for tasks requiring the formation of a thin film, lubrication, or the application of chemicals to specific areas. For processes that demand different spray geometries, you may consider using flat fan solutions in conjunction with alternative systems, such as full-cone spray nozzles or air-atomizing nozzles.

Criteria to Consider for the Right Selection
To ensure an industrial line operates efficiently, selecting a flat fan spray nozzle requires looking beyond just the orifice size; one must consider the full range of operating conditions:
1. Operating Pressure and Flow Rate: Pump capacity and line pressure directly influence the actual flow rate and impact characteristics of the chosen nozzle.
2. Spray Angle and Height: The distance between the nozzle and the target surface, combined with the spray angle, determines the overlap between adjacent nozzles, ensuring complete coverage without gaps along the line.
3. Material Compatibility: The nozzle body material—such as stainless steel, brass, or technical polymers—should be selected based on the chemical composition, temperature, and abrasiveness of the fluid being sprayed.
4. Filtration and Clogging Prevention: Especially in systems with low flow rates or narrow passages, in-line filtration should be considered to prevent clogging caused by particulate matter.
When the optimal combination of flow rate, spray angle, and material is achieved, flat fan spray nozzles provide reliable solutions for industrial lines—enhancing process quality while keeping operational costs balanced.

yelpaze tip flat fan sprey nozullar

Stainless Steel Flat Fan Nozzles

General characteristics of flat fan spray nozzles:

Spray Degree :  15˚ –  110˚

Thread Size : 1/8″ , 1/4″ , 1/2″

Thread Type : Male, BSPT / NPT

Material : Stainless steel , Brass , PP, PVC

Pressure : 1 – 200 bar  (for metal nozzles)

Drop size : From small to medium, homogeneous distribution over a wide flow range.

Applications: Water curtain creation, coating, metal surface treatment, washing, removal of hard particles by washing, gas cooling, particle washing, rinsing, etc.

yelpaze tip flat fan sprey nozul uclari

Flat Fan Nozzle Tips

General characteristics of flat fan spray nozzle tips:

Spray Degree : 15˚ – 110˚

Material : Stainless steel , Brass , Tungsten (tip core ) 

Pressure : 1 – 10 bar ( for metal nozzles)  , 50 – 200 bar (tungsten)

Drop size : From small to medium, homogeneous distribution over a wide flow range.

Application Areas: Water curtain creation, coating, metal surface treatment, washing, removal of hard particles by washing, gas cooling, particle washing, rinsing, hard particle spraying, etc.

 

PP Flat Fan Nozullar

PP Flat Fan Nozzles and Clamps

ss ve tungten flats

SS – Tungsten Flat Fan Nozzles

ss ve pp uclar

SS and PP Flat Fan Nozzle Tips

flat fan nozzle filtered

AISI 316 SS Flat Fan Nozzle – Filtered

kopuk su nozullari

General technical specifications for high-pressure rinsing and foam nozzles:

Spray Degrees: Red 0˚, Yellow 15˚ , Green 25˚ , White 40˚ , Black 65˚

Connection : 1/4″ quick connect plug

Material : 304 AISI stainless steel for rinsing and foaming, or brass for foaming only.

Pressure : Max. 275 bar

Area of ​​Use:

Red 0˚: For cleaning cracks in high or hard-to-reach areas, such as pavements and driveways.

Yellow 15˚: For washing surfaces that are difficult to clean, such as brick, concrete, and debris.

Green 25˚: For cleaning areas such as wood, railings, painted surfaces, and exterior cladding.

White 40˚: For cleaning surfaces such as grills and glass.

Black 65˚: For spraying detergent and foam.

Maximum Temperature Resistance : 70˚C

KOPUK NOZULLARI DERECELERI AKISLARI
w tip yelpaze nozul

AISI 316 W Type Flat Fan Nozzle

v tip kasik nozul

V-Type Deflector Type Fan Nozzle

TPC NOZZLE SET 1

Stainless Steel Triple Combination – Interchangeable Head

standart aci

Standard Angle Fan Type Spray Nozzle

PP kelepceli nozullar 4

PP / SS Nozzle Heads, PP Double / Single Clamp or Clamp-Free Nozzles

Common and diversified general technical specifications of the above-mentioned nozzles:

Spray Degree : 15° – 25° – 40° – 50° – 65° – 80°

Pressure : 0.3 – 4 bar

Threaded Ball Thread Size: 1/8″, 1/4″, 3/8″

Mounting Type: Clamp and threaded type (non-clamp)

Pipe Mouth: 14 mm, 16 mm, 18 mm

Clamp-free (Thread Type) Size: 1/8″, 1/4″, 3/8″, 1/2″

Clamp Types: Double / single clamp

Clamp Size: 3/4″, 1″, 1-1/4″, 1-1/2″

Clamp Outer Diameter: 25-27 mm, 32-35 mm, 38-43 mm, 44-51 mm

Clamped/Unclamped Body Material: PP, PVC, PTFE, SS

Quick and easy installation
Adjustable ball direction allows for quick nozzle direction changes.

Removable cover and valve allow for easy inspection and cleaning.

Applications: Metal surface treatment, degreasing, phosphating, spray cooling, fire prevention, dust control, washing, etc.

a2
a3
a4

FLAT FAN SPRAY NOZZLE FLOW PATTERN (SURFACE IMPACT).

Tip
Adsiz tasarim 78

A SAMPLE DRAWING AND A SAMPLE DIMENSIONS OF A STANDARD FLAT FAN NOZZLE

w tip flat fan nozzle

Paslanmaz Çelik W Tip Yelpaze Nozul

General technical specifications:

Spray Degree : 73° – 138°

Thread Size : 1/8″- 1″

Orifice : 0,43 mm – 18,0 mm

Material : Stainless steel 304 / 316, PP

Thread type : Male, BSPT / NPT

The unobstructed liquid flow channel minimizes clogging as much as possible. Integrated flow surface design, high-efficiency flat fan spray pattern, clean edge, homogeneous distribution.

qwqwqw

W TYPE WIDE DEGREE SPRAY NOZZLE FLOW PATTERN (SURFACE IMPACT)

v tip kasik nozul

V Type Deflector Nozzle

General technical specifications:

Spray Degree : 15° – 50°

Thread Size : 1/8″-3/4″

Orifice : 1,3 mm – 8,4 mm

Material : Stainless steel 304 / 316, PP, PVC, PTFE, Brass

Thread type : Male, BSPT / NPT

The unobstructed liquid flow channel minimizes clogging as much as possible. Integrated flow surface design, high-efficiency flat fan spray pattern, clean edge, homogeneous distribution.

aa2

NARROW ANGLE V TYPE SPRAY NOZZLE FLOW PATTERN (SURFACE IMPACT)

Application Areas
* Water Cooling:
Cooling of primary materials and other materials, conveyor belts, metal parts and machinery
* Dust Control: Dust control of building construction, coal ash, sand, crushed stone, slag ash and garbage sweepers
* Degreasing: Cleaning of industrial workpieces, bottle and food manufacturing process cleaning and degreasing
* Chemical Processing: Sterilization, pharmaceutical production process
* Gas ​​Cooling and Gas Cleaning: Tiles/glazed bricks and colored tiles/ceramics, industrial gas cooling.

Flat Fan Nozzles: 2501, 2502, 2503, 2504, 4001, 4002, 4003, 4004, 4005, 6501, 6502, 6503, 6504, 6505, 6506, 6508, 6510, 6515, 6520, 6530, 6540, 6550, 11001, 11002, 11003, 11004, 11005, 11006, 11008, 11010 etc.

error: